Shanghai Tanghau Tower Packing

Type F1 float valve columns

F1-type float valve plate tower is a tower, used for gas-liquid mass transfer process.

Float valve float valves can, with the gas load to adjust the opening degree of change, therefore, F1-type float valve tower operating flexibility, especially in low load, can maintain normal operation.

F1-type float valve as gas-liquid contact tower in good condition, small amount of entrainment (due to the level of blowing gas, therefore), tray efficiency high, large production capacity.

Tower structure is simple, inexpensive manufacturing costs, and can adapt to the conditions of materials used, the chemical industry, oil refining industry, the most widely used type of tower one.

In the separation of stable isotopes used to overcome the shortcomings of the tower blister developed on the basis Bubble contact device.

Production capacity larger than the blister tower about 20% to 40%; gas two limit load ratio of 5 to 6, operating flexibility; plate efficiency of 10% higher than the bubble cap tower to 15%; less entrainment, surface gradient small; structure is difficult to blister between the tower and the sieve column; better adaptability of materials such as flux, amplification of small, commonly used in the initial concentration of heavy water production process segment.